Resultater for

Connectors - Tilvirker Produsent - Tyskland

105 Bedrifter

0 Produkter

INNOCOSO GMBH

Tyskland

Selskapet INNOCOSO GMBH, er en Tilvirker/ Produsent, som opererer i Elektroniske koblinger bransjen. Det opererer også i connectors, Connector overview, Connector specialist, Plug connection manufacturer, Plug connection, Connector solutions, Connector manufacturer, Connector manufacturer Germany, og Connector manufacturer automotive bransjene. Det har base i Oberhaching, Tyskland.
MURRPLASTIK SYSTEMTECHNIK GMBH

Tyskland

Selskapet MURRPLASTIK SYSTEMTECHNIK GMBH, er en Tilvirker/ Produsent, som opererer i Dobbeltviklete kabler bransjen. Det opererer også i Cable protection sheaths, Energy chains, Energy supply system, Cable entry system, identification, Cable protection, Energy supply chains, Energy supply chains, pre-assembled, og Stickers for labelling cables and leads bransjene. Det har base i Oppenweiler, Tyskland.
IVG SYSTEMTECHNIK GMBH

Tyskland

Selskapet IVG SYSTEMTECHNIK GMBH, er en Tilvirker/ Produsent, som opererer i Fjæringer bransjen. Det opererer også i Hengsler, Kjølelagre, gas-pressure shock absorber, threaded inserts, toggle latches, support feet, Twist locks, Replacement parts for commercial kitchen technology, og Flame protection filter bransjene. Det har base i Pfungstadt, Tyskland.
RME CABLE ASSEMBLY GMBH

Tyskland

Selskapet RME CABLE ASSEMBLY GMBH, er en Tilvirker/ Produsent, som opererer i Dobbeltviklete kabler bransjen. Det opererer også i Implementation grommets, Strain relief on low pressure potting systems, Printing of components and insulating components, Cable harnesses with UL label, Connector cables, Components, electronic, Assemblies for industrial electronics, BGA assembly of PCBs, og Data transmission cables, specially prepared bransjene. Det har base i Flörsheim Am Main, Tyskland.
BIZLINK ROBOTIC SOLUTIONS GERMANY GMBH

Tyskland

Selskapet BIZLINK ROBOTIC SOLUTIONS GERMANY GMBH, er en Tilvirker/ Produsent, som opererer i Dobbeltviklete kabler bransjen. Det opererer også i BUS cables, Data cables for industry, Energy feeding systems, Industrial cables, pre-assembled, Industrial robot accessories, Plastic cable conduits, Cable protection sheaths, Portable measuring systems, og Cable carrier lines bransjene. Det har base i Hannover, Tyskland.

En side for firmaet ditt

Ser du dette? Dine potensielle kunder også! Bli med oss for å synes på europages.

Legg til firmaet mitt

ODU GMBH & CO. KG

Tyskland

Selskapet ODU GMBH & CO. KG, er en Tilvirker/ Produsent, som opererer i Elektriske komponenter og deler bransjen. Det opererer også i connectors bransjene. Det har base i Mühldorf A. Inn, Tyskland.
KRAMSKI GMBH

Tyskland

Selskapet KRAMSKI GMBH, er en Tilvirker/ Produsent, som opererer i Former til plast og gummi bransjen. Det opererer også i stamping parts, tool manufacturing, moulds production, og connectors bransjene. Det har base i Pforzheim, Tyskland.
ALBS-ALLTRONIC BALTHASAR SCHMIDT

Tyskland

Selskapet ALBS-ALLTRONIC BALTHASAR SCHMIDT, er en Tilvirker/ Produsent, som opererer i Audio- og videoutstyr bransjen. Det opererer også i Sensorer, connectors, Sensorer, og Voltage transformers bransjene. Det har base i Ötisheim, Tyskland.
HUMMEL AG

Tyskland

Selskapet HUMMEL AG, er en Tilvirker/ Produsent, som opererer i Armaturer til industrielle formål bransjen. Det opererer også i cable connections, explosion-proof, Cable protection sheaths, connectors, og plugs bransjene. Det har base i Denzlingen, Tyskland.
WECO CONTACT GMBH

Tyskland

Selskapet WECO CONTACT GMBH, er en Tilvirker/ Produsent, som opererer i Elektroniske koblinger bransjen. Det opererer også i Terminals for printed circuit boards, terminal blocks, electrical terminals, og connectors bransjene. Det har base i Hanau, Tyskland.

HARTING STIFTUNG & CO. KG

Tyskland

Selskapet HARTING STIFTUNG & CO. KG, er en Multi-Category, som opererer i Elektroniske koblinger bransjen. Det opererer også i System cables, jack outlets, connectors, og Metal PCB bransjene. Det har base i Espelkamp, Tyskland.
FEINMETALL GMBH

Tyskland

FEINMETALL GmbH. Precise and sophisticated contact solutions are an important success factor particularly for testing electric and electronic components and products. Feinmetall offers comprehensive contact solutions for the electronics, automotive and semiconductor industries, thereby providing an important contribution for your quality management. Both of the company's product groups, namely test probes for contacting printed circuit boards or cable harnesses, as well as probe cards for the semiconductor test, complement each other perfectly, resulting in unique skills in cutting-edge precision. For over 50 years, Feinmetall has been a reliable partner in the international high-tech industry. The company is therefore represented worldwide with sites in the USA, Czech Republic, Tunisia, Mexico, Singapore, Taiwan and China, as well as headquarters in Germany.

Nettsted

HUGO ARENS GMBH & CO. KG

Tyskland

We are experts in the development and production of cast aluminium parts. Our Arens tubular fittings are highly versatile and have set new standards in quality and design. Our RoHS and REACH compliant products are manufactured in Iserlohn, Germany, with an in-house quality management system in place. Our customers include leading businesses from the most varied of industries worldwide. We are also happy to develop individual solutions and custom products for you. Simple assembly in no time. The Arens tubular fittings are easily installed without the need for welding or special tools to create railings for machinery or work platforms, for instance, or as hand rails and poles in buses and trains. Our products provide support. We manufacture all our products using high-quality DIN-standard aluminium alloys which provide maximum stability and resistant to corrosion while remaining lightweight.

Nettsted
PITZL METALLBAU GMBH & CO. KG

Tyskland

Pitzl has over 30 years' experience as a leading supplier of wood connecting systems. "The right concept for every application" is Pitzl's motto. We are synonymous with flexibility. In addition to our broad range of post bases, connectors, tools, soundproofing solutions and many more products, we offer custom-designed products based on customers' individual needs and specifications. This enables us to ensure that each processor receives the optimal solution proposal for effective wood connection, even with complex requirements. One of only a handful of manufacturers, Pitzl produces post bases, connectors and balcony pillars with extensive ETA approval and the associated legally required CE mark. It goes without saying that "Made in Germany" stands for the highest quality. This means we can guarantee processors maximum product safety and minimise risks for traders.

Nettsted
FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG

Tyskland

We are one of the market's leading manufacturers of circular connectors. An owner-managed family business, founded and headquartered in Neckarsulm, Germany, we employ 1000 people nationally and 1700 around the world. What began as a small operation in 1960 has steadily expanded into a strong and international group of companies. The Binder Group's five sister companies and eight subsidiaries are represented by sites in Germany, Sweden, the UK, Hungary, the Netherlands, Switzerland, France, China, Singapore and the USA, all of which contribute to our ongoing success day in, day out. This success is reflected in our impressive and sustained growth. Our vision is to further internationalise the Binder Group and to make further advances into sectors such as medical technology, agriculture, and food and drink. We are a traditional, down-to-earth family business with a strong belief in direct approaches and quick decision-making.

Nettsted
IRUS-SYSTEM

Tyskland

Irus-System connects. The wide product range of Irus-System guarantees that virtually all customer requests are met. These include panel connectors, glass connectors, "Flexi-Long" aluminium profiles for information stands, dividers and partitions, the "Flexi-Quick" exhibition stand system, or simply just various displays implemented exactly according to customer requirements. Everything can be combined together and with each other. A small number of components gives rise to lots of opportunities. The accessories range for the various segments is precisely tailored to demand. The benefits for you of Irus products - long service life - extremely flexible - easy to handle - low shipping weight and volume - suitable for universal and diverse use

Nettsted
CONEC ELEKTRONISCHE BAUELEMENTE GMBH

Tyskland

CONEC Elektronische Bauelemente GmbH is an efficient manufacturer of high-quality connectors, patch cable and single ended cable as well as enclosure technology. CONEC products are used in automation, telecommunications and energy technology, machine manufacturing, agriculture and medical technology, transportation and the aviation industry. The headquarters in Lippstadt has a large research and development department, its own tool-making department, a CNC-turning department and a synthetics injection moulding plant. As part of the Amphenol Group, CONEC participates in the growth and development opportunities of a globally active group and at the same time acts flexibly and quickly as a medium-sized company in order to optimally adapt to changing customer needs. CONEC is a global player with its own subsidiaries and/or production sites in Canada, the USA, China, the Czech Republic, Poland and France. The product portfolio includes connectors of the following categories: • D-SUB/IP67 D-SUB Connectors • IP67 RJ45 / USB / Mini USB / Fiber Optic LC Duplex • CONEC Hybrid Connectors • Connectors for agricultural and construction machines • Circular Connectors • PCB Connectors • Customer specific solutions The company’s quality management ensures high quality by applying the international standards DIN EN ISO 9001. Depending on the product family, CONEC industrial connectors are tested and approved in accordance with UL, CSA or VDE.

Nettsted
OETIKER DEUTSCHLAND GMBH

Tyskland

Selskapet OETIKER DEUTSCHLAND GMBH, er en Tilvirker/ Produsent, som opererer i Jern- og stålbånd bransjen. Det opererer også i fastening clamp, Ear clamps, Hose clips, Screw clamps, Universal clamps, Tape clamp, Multi crimp rings, Quick connectors, og SMILe® compact quick connectors bransjene. Det har base i Endingen, Tyskland.
HANS TURCK GMBH & CO. KG

Tyskland

Turck is one of the leading groups worldwide in the industrial automation sector. With more than 4200 employees across 28 national subsidiaries and distribution partners in a further 60 countries, we are always in a position to provide local support to our customers, anywhere in the world. As a specialist in sensor, field bus, connection, interface and RFID (Radio Frequency Identification) technology, we offer efficient solutions for factory and process automation. Our data and communications solutions make us one of the pioneers of Industry 4.0. With cutting-edge production sites in Germany, Switzerland, the USA, Mexico and China, our family-owned company is able to meet the demands of local markets quickly and flexibly at any time. The markets: Whether in the mechanical and plant engineering, automotive, transport and handling, mobile equipment or food and packaging industry, Turck automation solutions and products increase the availability of your systems.

Nettsted
HERBERHOLZ GMBH

Tyskland

For over 60 years, we have been producing and supplying shut-off valves, choke valves and regulating valves made of a variety of materials and nominal widths, primarily for industrial applications but also for building technology and the automotive sector. In doing so, we use components which are in stock and which can be installed and equipped with the required drive systems in no time at all. We are committed to carrying out your system tasks.

Nettsted

SITEMA GMBH & CO KG

Tyskland

SITEMA is the only company in the world specialising exclusively in the development and production of clamping devices and linear brakes on round rods. The consequence of that specialisation: SITEMA is an internationally respected partner to machinery manufacturers. We specialise in securing, clamping and fixing loads in axial motion. It is a field in which we have been a leading brand name for many years, particularly with our SITEMA clamping heads. Alongside our broad product portfolio, we offer unique consulting and solution-delivering expertise to meet any challenge. SITEMA develops and produces hydraulically, pneumatically, mechanically and electrically operated clamping units for a many different applications.

Nettsted
HAAG + ZEISSLER MASCHINENELEMENTE GMBH

Tyskland

HAAG + ZEISSLER is a high-tech firm with more than 40 years’ experience. Over the years, we have developed into one of the leading manufacturers of rotating assemblies and piping joints – always focussing on the global market. Thanks to our outstanding technical expertise, high product quality (Made in Germany) and solid experience, we distribute solutions tailored to the challenges faced by our customers. Our goals: 100% customer satisfaction, 0% error rate and the best possible service. We design, develop and produce rotating assemblies and piping joints for the mechanical, chemical, electrical, pharmaceutical and steel industries, to name only a few examples of the fields of application. Our products are suitable for both warm and cold water, steam, heat transfer oil, hydraulic oil, compressed air, different gases, cooling lubricant, vacuum and many other media.

Nettsted
BTS BEFESTIGUNGSELEMENTE-TECHNIK GMBH

Tyskland

BTS Befestigungselemente-Technik GmbH is a medium-sized company in the metalworking industry, focused on the manufacture and sale of fastening and connecting materials. The company was founded in 1983. It is located in Saarburg, in the German state of Rhineland-Palatinate, and employs around 50 members of staff. The product range comprises wing nuts, wing screws, cap nuts, timber connectors, beam clamps, channel nuts, sliding blocks, hammer-head bolts and various specialist parts made to drawings or samples. It is supplemented and expanded continuously. Our company is characterised by a high added-value chain, from metal casting "Made in Germany" to mechanical processing, customer-specific surface treatment and individual packaging. We act based on our customers' requirements, in a flexible and quality-conscious manner and through certified management systems.

Nettsted
KÖSTER & CO. GMBH

Tyskland

Köster manufactures stud welding and fastening technology using their in-house production facility for stud welding machines and equipment, welding studs, shear studs and cold formed parts. KÖCO offers you a wide range of solutions for any applications in a variety of sectors: Building/steel/bridge construction, power plant/energy generation construction, vehicle/rail construction, plant/machine construction, shipbuilding, fire retardant construction. Thanks to our well-founded technical expertise and our drive to innovate, we create safe, efficient solutions. Our studs and stud welding technology are used all over the world thanks to our reputation as a reliable partner in the stud welding technology sector. We use our extensive knowledge of materials, products and processes to guarantee the necessary safety requirements are met. So that you can be sure that you are using the right KÖCO products in the right applications, we are also happy to provide on-site technical support when it comes to your tasks.

Nettsted
INTERHYDRAULIK GESELLSCHAFT FÜR HYDRAULIK-KOMPONENTEN MBH

Tyskland

We are a leading manufacturer of components for hydraulic drive technology. We can provide it all – from advice to development and production, through to just in time delivery or as a kit. We also offer various logistics services. INTERHYDRAULIK provides top quality in accordance with DIN EN ISO 9001: 2008 and DIN EN ISO 14001: 2009. INTERHYDRAULIK GmbH is headquartered in Selm. Here, at around 28 km from Dortmund, administration and production are combined under one roof. It is the objective and task of our around 130 employees to continually improve the quality of our products and services. The design, development, production and logistics areas come together with other areas of the company to line a path towards customer-optimised products. We offer innovative products and excellent service.

Nettsted
CIC - KLAUS CZERWONKA

Tyskland

As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

Nettsted
CVEP GMBH

Tyskland

CVEP GmbH is your systems supplier for all vehicle electrics components and electronic equipment. CVEP GmbH has been providing its customers comprehensive advice on several product areas since 2016, on the basis of the enterprise concept, thereby familiarising their customers with technologies and designs from the areas of OEM, suppliers and trade. The variety of products we offer as a manufacturer and distributor provides many advantages for customers and saves them time when carrying out time-consuming searches for new products for their applications. All our applications and developments satisfy the quality standards in the OEM application field. All of our suppliers are certified. As manufacturers, we develop and produce complex individually customised central electrical systems, with and without intelligent control units, as well as special relays and CAN I/O modules. For this we use our modular housings, which are splash-proof and water-tight according to IP67.

Nettsted
JÄGER & FRESE GMBH

Tyskland

Manufacturing and distribution of connecting elements with a 3600 square metre production and warehouse area. Our customers include the furniture industry, the woodworking industry and staircase manufacturers, machine and apparatus production, shopfitters and shelving manufacturers, heating manufacturers and the sanitary sector. Our special services: High supply capacity and on-time delivery and arrangement, packaging and assembly of small iron and plastic parts. Our speciality is manufacturing height-adjustable screws and furniture gliders made of steel, stainless steel and plastic. Our product range covers dimensions of M 8x10 mm to M 24x300 mm, with all common surfaces. We are happy to help with new technical developments and problems – we will work together with you to find a solution.

Nettsted
SWP SCHWARZWALD PRÄZISIONSTECHNIK GMBH

Tyskland

SWP - Schwarzwald Präzisionstechnik has set itself the task of bundling strengths by cooperating with our innovative and efficient exclusive premium partner with in-house production and then providing these as a high-performance product portfolio. The expertise of our premium partner enables us to provide a tailor-made solution for every parts requirement. Top-quality in the best conditions combined with very short delivery times. Our premium partner’s machinery meets all current technical requirements. Together with our exclusive premium partner, we invest in trained and motivated staff so that we can always ensure the very best process safety. Short circuits and rapid communication are our credo, so that we answer all your questions within 24 hours. The best conditions for your success.

Nettsted
B + B THERMO-TECHNIK GMBH

Tyskland

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Nettsted